STEP 1: PREP
Clean the area with warm soapy water or an alcohol spray/wipe to remove any dirt and dust prior to installing. Dry the area completely with a microfibre.
STEP 2: APPLICATION
Peel the overlay from the backing. Using the transfer tape position the overlay on the badge and apply pressure to adhere the vinyl. To help position the bottom portion of the logo you can cut through the transfer tape to separate the overlay (as shown in the video). This will provide you with more freedom when lining up the bottom pieces individually as opposed to both at the same time.
STEP 3: FINISHING TOUCHES
Gently peel back the transfer tape to reveal the badge overlay. To further assist the vinyl in adhering you can lightly apply heat with a heat gun or hair dryer. This overlay is designed to have a thin chrome border around the perimeter of the badge overlay.
Contact us if you have made a mistake and we will happily provide a solution.