STEP 1: PREP
Clean the area with warm soapy water or an alcohol spray/wipe to remove any dirt and dust prior to installing. Dry the area completely with a microfibre.
STEP 2: APPLICATION
Peel the mirror indicator overlay from the backing paper. Line it up with one edge and gradually apply pressure to adhere it to the mirror indicator. If you need to re-adjust, gently lift and reposition.
STEP 3: DETAILS
If you need to re-adjust, gently lift and reposition. If the vinyl stretches during installation, lightly heat the overlay with a hair dryer or heat gun to help it conform back to shape.
STEP 4: FINISHING TOUCHES
If your mirror indicator has transfer tape on it because of a logo detail, gently peel back the transfer tape once you've applied pressure the whole way along the overlay.
To further assist the vinyl in adhering you can lightly apply heat with a heat gun or hair dryer.
Contact us if you have made a mistake and we will happily provide a solution.