STEP 1: PREP
Clean the area with warm soapy water or an alcohol spray/wipe to remove any dirt and dust prior to installing. Dry the area completely with a microfibre.
STEP 2: APPLICATION
Peel the Hyundai logo from the backing paper and using the transfer tape position on the rear badge. Apply pressure with your finger over the vinyl through the transfer tape. Once secured gently peel back the transfer tape.
STEP 3: FINISHING TOUCHES
Using your finger or a squeegee work your way around the badge tucking the overhang of vinyl around the small lip on the badge. To further assist the vinyl in adhering you can lightly apply heat with a heat gun or hair dryer. Repeat above steps with the remaining letters.
Contact us if you have made a mistake and we will happily provide a solution.