STEP 1: PREP
Thorough cleaning is required or else the vinyl will not stick. Use isopropyl alcohol to remove any coatings/wax. Dry the area completely with a microfibre.
STEP 2: APPLICATION
Partially peel the overlay from the backing and start by lining it up with one end of the trim you are applying it to. Gradually pull away the backing paper as you apply pressure to the vinyl securing it to the skirt skirt. Use a heat gun to lightly heat the edges down and push them in further with your fingers or a squeegee to secure sufficiently.
STEP 3: FINISHING TOUCHES
Trim away any excess vinyl at the edges for a seamless finish. To further assist the vinyl in adhering you can lightly apply heat with a heat gun or hair dryer. Contact us if you have made a mistake and we will happily provide a solution.