STEP 1: PREP
Clean the area with warm soapy water or an alcohol spray/wipe to remove any dirt and dust prior to installing. Dry the area completely with a microfibre.
STEP 2: APPLICATION
Peel reflector overlay from the paper backing. Starting at the edge furthest away from the boot, line the overlay edge up with the edge of the reflector. Once happy with the positioning gradually apply pressure and smooth from right to left, wrapping it around the curve towards the boot.
STEP 3: DETAILS
If you need to re-adjust, gently lift and reposition. If the vinyl stretches during installation, lightly heat the overlay with a hair dryer or heat gun to help it conform back to shape. When you reach the curve make sure to use tension with the edge you are holding so bubbles can be smoothed out.
STEP 4: FINISHING TOUCHES
Using a credit card with a microfibre or a squeegee apply pressure to the edges to ensure they are stuck down securely. To further assist the vinyl in adhering you can lightly apply heat with a heat gun or hair dryer.
Contact us if you have made a mistake and we will happily provide a solution.