STEP 1: PREP
Clean the area with warm soapy water or an alcohol spray/wipe to remove any dirt and dust prior to installing. Dry the area completely with a microfibre.
Dry fit the overlay. Before peeling the backing, hold the overlay up to the headlight to get a feel for its placement and alignment. Identify key edges or contours you’ll use to line it up.
STEP 2: APPLICATION
Start with applying the small tint piece to the side of the headlight. Position on the headlight and smooth using your fingers or a squeegee. Next install the eyelid, line up the edge of the vinyl with the top edge of the headlight. Smooth using a left to right motion as you work your way to the other end of the headlight.
STEP 4: FINISHING TOUCHES
Go over the entire overlay with firm pressure to ensure full adhesion, especially around the edges. Lightly heat the area with a heat gun or hair dryer to further aid the adhesive.
Contact us if you have made a mistake and we will happily provide a solution.