STEP 1: PREP
Clean the area with warm soapy water or an alcohol spray/wipe to remove any dirt and dust prior to installing. Dry the area completely with a microfibre.
STEP 2: APPLICATION
Peel the overlay partially from the backing paper. Line it up with one edge and gradually apply pressure using your finger. As you work your way along the piece, peel the overlay away from the backing paper further. If you need to re-adjust, gently lift and reposition.
STEP 3: DETAILS
If the vinyl stretches during installation, lightly heat the overlay with a hair dryer or heat gun to help it conform back to shape.
STEP 4: FINISHING TOUCHES
Using a squeegee or your finger gently push the vinyl into the edges for a seamless finish. To further assist the vinyl in adhering you can lightly apply heat with a heat gun or hair dryer.
Contact us if you have made a mistake and we will happily provide a solution.