STEP 1: PREP
Clean the area with warm soapy water or an alcohol spray/wipe to remove any dirt and dust prior to installing. Dry the area completely with a microfibre.
Dry fit the overlay. Before peeling the backing, hold the overlay up to the top edge of the tail light to get a feel for its placement and alignment. Identify key edges or contours you’ll use to line it up.
STEP 2: APPLICATION
Peel the overlay partially from the backing paper and position at one edge. Gradually apply pressure and smooth onto the tai light using your fingers, removing the backing paper as you work your way to the other end.
STEP 4: FINISHING TOUCHES
Go over the entire overlay with firm pressure to ensure full adhesion, especially around the edges. Lightly heat the area with a heat gun or hair dryer to further aid the adhesive.
Contact us if you have made a mistake and we will happily provide a solution.