STEP 1: PREP
Clean the area with warm soapy water or an alcohol spray/wipe to remove any dirt and dust prior to installing. Dry the area completely with a microfibre.
STEP 2: APPLICATION
Peel the fog light overlay from the backing paper. Line it up with one edge and gradually apply pressure in a circular motion from centre out. If you need to re-adjust, gently lift and reposition.
STEP 3: DETAILS
If the vinyl stretches during installation, lightly heat the overlay with a hair dryer or heat gun to help it conform back to shape.
STEP 4: FINISHING TOUCHES
Using a squeegee or your finger gently push the vinyl into the edges for a seamless finish. To further assist the vinyl in adhering you can lightly apply heat with a heat gun or hair dryer.
Contact us if you have made a mistake and we will happily provide a solution.