Volkswagen Rear Badge Overlay

STEP 1: PREP

1. Clean the rear badge area thoroughly using warm soapy water or an alcohol-based cleaner to remove dirt, wax, and grease.

2. Dry the area completely with a clean microfibre cloth.
   

STEP 2: APPLICATION

1. Peel the raised badge overlay from its backing carefully.

2. Align the overlay with the VW badge, using the contours of the emblem as your guide.

3. Lightly press the overlay into place, starting from the center and working outward to avoid air bubbles.

4. Once aligned, apply firm, even pressure across the entire overlay to ensure full adhesion.

STEP 3: FINISHING TOUCHES

1. Slowly remove any transfer tape if included, ensuring the overlay stays in place.

2. Lightly heat the overlay with a heat gun or hair dryer (low setting) to improve adhesion, especially on edges and curves.

3. Press down firmly along the edges to secure the overlay.

4. Avoid washing the vehicle or exposing the badge to heavy rain for 24 hours to allow the adhesive to cure.