STEP 1: PREP
Clean the area with warm soapy water or an alcohol spray/wipe to remove any dirt and dust prior to installing. Dry the area completely with a microfibre.
STEP 2: APPLICATION
Peel the third brake light overlay from the paper backing. Starting at one edge apply pressure and smooth the overlay down along the third brake light.
STEP 3: DETAILS
If you need to re-adjust, gently lift and reposition. If the vinyl stretches during installation, lightly heat the overlay with a hair dryer or heat gun to help it conform back to shape.
STEP 4: FINISHING TOUCHES
Gently smooth any creases with your fingers and push the vinyl edges into the gap for a neat finish. To further assist the vinyl in adhering you can lightly apply heat with a heat gun or hair dryer.
Contact us if you have made a mistake and we will happily provide a solution.