- Crafted from premium automotive-grade vinyl for durability and a perfect finish
- Precision laser-cut to ensure an exact fit every time
- Backed by a 1-year warranty for peace of mind
- Screen will have round circle cutout for knobs on both right and left side of screen.
What is the warranty on the film?
What are the benefits of the film?
My order arrived damaged/faulty?
What if I ruin part of my PPF product/kit?
Can I return the PPF product?*
How hard is PPF to install?
Video Instructions
- Wash the vehicle thoroughly to remove dirt and debris.
- Decontaminate the surface with a clay bar or clay mitt.
- Dry the area completely using clean microfibre towels.
- Wipe down the panel with isopropyl alcohol to remove any remaining oils or residues.
- Ensure workspace is clean, well-lit, and free of dust or wind.
- Slip Solution: Fill a spray bottle with water and add a few drops of baby shampoo or slip agent (provided in the syringe). This helps position the film.
- Tack Solution: In a separate bottle, mix water with 20–30% isopropyl alcohol. This helps the film stick when you're ready to secure it.
- Spray both the panel and your hands with slip solution to prevent fingerprints and premature sticking.
- Peel the film from the backing and generously spray the adhesive side with slip solution.
- Place the film on the screen, sliding it into position as needed.
- Once aligned, spray tack solution under one edge or corner to lock it in place.
- Begin squeegeeing from the tack point outward, using overlapping strokes to push out water and air.
- Use slip solution on top of the film to reduce friction on the squeegee.
- Double-check for bubbles or moisture under the film — push these out carefully.
- Use heat to set the film edges and ensure proper adhesion.
- Allow the film to cure for 24–48 hours before washing or exposing to harsh elements.